Product Overview
IronSolv Restore is an iron deposit descaler and metal oxide remover designed for professional and industrial cleaning applications. It is formulated to remove iron deposits, carbonate embedded iron deposits, and other metal oxides through deagglomeration, sequestration, and chelation.
IronSolv Restore is non-DOT regulated, non-hazardous, biodegradable, and non-corrosive to skin and equipment. The formula is inhibited to help minimize corrosion of base metals, including galvanized steel, carbon steel, stainless steel, aluminum, copper, and brass. It also helps prevent dissimilar metal plating and flash corrosion after cleaning.
This product quickly converts ferric iron into ferrous soluble iron, making iron deposits easier to rinse away. It can also phosphatize red iron oxide into black iron oxide when preparing surfaces for painting. IronSolv Restore can be used by spray and rinse application for removing red iron stains from cement, tile, bathtubs, and toilets. It also brightens stainless steel, removes aluminum oxides, and can be used for aluminum truck box and rim cleaning.
Key Features
- Removes iron deposits and metal oxides
- Helps remove carbonate embedded iron deposits
- Works through deagglomeration, sequestration, and chelation
- Quickly converts ferric iron into ferrous soluble iron
- Phosphatizes red iron oxide into black iron oxide for paint preparation
- Non-DOT regulated
- Non-hazardous and biodegradable
- Non-corrosive to skin and equipment
- Inhibited to minimize corrosion of base metals
- Safe for galvanized steel, carbon steel, stainless steel, aluminum, copper, and brass
- Helps prevent dissimilar metal plating
- Helps prevent flash corrosion after cleaning
- Brightens stainless steel
- Removes aluminum oxides
Applications
- Iron deposit removal
- Metal oxide removal
- Rust stain removal
- Carbonate embedded iron deposit cleaning
- Surface preparation before painting
- Stainless steel brightening
- Aluminum oxide removal
- Aluminum truck box and rim cleaning
- Spray and rinse cleaning applications
- Professional and industrial cleaning
Usage and Dosage
- Use full strength or dilute down to 1% depending on deposit severity and cleaning time
- Complete deposit removal depends on deposit composition, age, and quantity
- Cleaning time and product amount needed may vary by application
- Apply by spray and rinse where appropriate
- Allow sufficient contact time for iron deposit and oxide removal
- Rinse thoroughly after cleaning
- Test on a small area before full application
- Review SDS before handling or use
